Orligno 200

Orligno 200

Orligno 200 a new pathway in wood gasification boiler technology

Orligno-200

Orligno-200

ORLIGNO 200 offer unique design as well as a range of constructional solutions benefits the comfort of use and customer satisfaction. Technical parameters resulting from wood combustion process meet the most rigorous European norms and provide nearly twice as much heat as traditional boilers or fireplaces. The appliances can work in open as well as pressurized systems in accordance with current regulations.

ORLIGNO 200 boilers are designed to heat a variety of places. They are most commonly used in detached houses, drying rooms, production halls and workshops. Available types are as follows: 18 kW, 25 kW, 40 kW, 60 kW, 80 kW.

The ORLIGNO 200 boiler can combust wood of various granulation from sawdust to blocks. Shavings and other small pieces should be burnt together with blocks.

orligno-200-tech-features

  • Boiler advantages
  • Efficiency 91%
  • 3-year warranty for boiler tightness
  • Low cost maintenance
  • User-friendly
  • Small amount of ash residue
  • Large loading capacity
  • Length of wooden blocks 50 cm (18, 25, 40 kW), 75 cm (60 kW), 100 cm (80 kW)
  • Up to 12 hours continuous operation
  • Types available 18-80 kW
  • Electronic regulator with an option to fit remote control system
  • Made of the best quality 8mm boiler steel
  • rd Environmentally friendly; boiler in the 3 emission class according to PN-303-5
  • Suitable to operate in a pressurized systems

Microprocessor temperature regulator Ekoster 2 is designed to control the heating process and the activation of circulation pump in the central heating installation.

orligno-200-tech-panel

  • The regulator fulfils the following tasks:
  • Upholding the pre-set boiler temperature through heating control
  • Smooth start of the fan which eliminates wood gas detonations
  • Adjustable fan power (service mode)
  • Programmable boiler blow
  • Automatic control turn-off after boiler extinction
  • Blocking fan operation when stoking to the boiler
  • Central heating circulation pump control
  • “COMFORT SYSTEM”- a system that prevents the pump blockages when the boiler is not in operation
  • Protection from boiler freezing and overheating
  • Signalling when the boiler temperature sensor is damaged
  • Modulated intensity of the display, it increases when the settings are being changed
  • Compatible with Ekoster Control remote control system

orligno-200-tech

Orlan 80

Orlan 80

Orlan Eko 80 High Efficiency Wood/Coal Burning Gasification Residential Boiler 91% – 275,000 BTU

Orlan 80

Orlan 80

Orlan Eko 80 Wood Steel Boiler provide a convenient, safe and environmentally friendly way to heat your home and domestic hot water with wood. Orlan Eko boilers assure the independence and self-reliance that heating with several different fuel options-wood, 50% coal/wood chips, saw dust, pellets and corn cobs with kernels. Because the boilers use wood gasification combustion, they give unusually high overall heating efficiency up to 91% and will hold heat from single load up to 12 hours. They use substantially less wood or other burning material than conventional boilers and outdoor water stoves with no visible smoke when fully operating. 91% efficiency Orlan Eko wood burning and gasification combustion boilers may be used for heating any kind of building.

They are mostly used in one-family houses, drying houses, workshops, halls, or greenhouses. However, boiler placement is not limited to these applications; the above are just examples of where EKO-Line boilers have worked with success. The EKO-Line wood burning boilers has a large finned firebox and secondary combustion chamber maximize the burn time and minimize wood consumption. Easy adjustments to the automatic temperature control, secondary air regulator, and flue gas damper enhance fire maintenance.

  • Optimized Combustion.
  • Up to 91% efficiency.
  • Output modulating from 40% to 100%.
  • Designed to Ensure uniform thermal load.
  • One load lasting from 8 to 12 hours.
  • ETL Approved.
  • Swing-open burner door for easy service.
  • Sealed wood gasification chamber – used simultaneously as a loading chamber.
  • Fully assembled, ready for installation.
  • Adapted for closed (pressurized) or open hot water systems.
  • Secondary Combustion Chamber for High Efficiency and Low Emissions.
  • RK2001R4E Boiler electronic regulator mounted directly on top ot the boiler for improved response.
  • Ash Tray.
  • Draft regulator.
  • Fan – linked to the microchip controller, monitoring the quality of the whole burning process – on Orlan Eko 60 and 80 models.
  • Spacious fire box to increase autonomous.
  • Made from Boiler Steel.

  • Smoke tube heat exchanger – (flue gas to water) heats up the installation water.
  • Exhaust reheat space – the main combustion chamber, where temperature reaches about 2000 degreesF serves as an ash pit.
  • Nozzle – made of refractory concrete, mixes wood gases with the secondary air and a flammable mixture is produced that undergoes self-ignition at about 1000 degrees.
  • Safe guard thermostat – each boiler is equipped with an additional safe guard thermostat, which switches off the fan while the water gets up to 180F.
  • Chimney flap – made of high quality steel. Tight flap adhesion to the combustion duct assures the burning chamber tightness .
  • Ash pit – steel bottom of the burning chamber, ceramic ash pit added (working temp. 2200 F) and additionally covered by refractory concrete .
  • Boiler door – produced of high quality steel, insulated with Nobasil thermal insulation and inside covered by refractory concrete layer.
  • Boiler door protected with heat-resisting fiberglass cord.
  • Anti-Burn Levers for Doors.
  • Factory tested.
Heating Capacity 10000 / 16000 Sq. Ft.
Power output 80 kW
Weight 1165 kg
Exhaust gas pipe diameter 210 mm
Efficiency 91 %
Water capacity 205 L
Height 1575 mm
Width 860 mm
Depth 1700 mm
Max working pressure 1.8 bar
Max. length of wood 1000 mm
Required chimney draught 20 Pa
Outlet and inlet size 2 1/2 inch
Power supply 230V / 50Hz
Brochure
Orlan 60

Orlan 60

Orlan Eko 60 High Efficiency Wood/Coal Burning Gasification Residential Boiler 91% – 205,000 BTU

Orlan 60

Orlan 60

Orlan Eko 18 Wood Steel Boiler provide a convenient, safe and environmentally friendly way to heat your home and domestic hot water with wood. Orlan Eko boilers assure the independence and self-reliance that heating with several different fuel options-wood, 50% coal/wood chips, saw dust, pellets and corn cobs with kernels. Because the boilers use wood gasification combustion, they give unusually high overall heating efficiency up to 91% and will hold heat from single load up to 12 hours. They use substantially less wood or other burning material than conventional boilers and outdoor water stoves with no visible smoke when fully operating. 91% efficiency Orlan Eko wood burning and gasification combustion boilers may be used for heating any kind of building.

They are mostly used in one-family houses, drying houses, workshops, halls, or greenhouses. However, boiler placement is not limited to these applications; the above are just examples of where EKO-Line boilers have worked with success. The EKO-Line wood burning boilers has a large finned firebox and secondary combustion chamber maximize the burn time and minimize wood consumption. Easy adjustments to the automatic temperature control, secondary air regulator, and flue gas damper enhance fire maintenance.

  • Optimized Combustion.
  • Up to 91% efficiency.
  • Output modulating from 40% to 100%.
  • Designed to Ensure uniform thermal load.
  • One load lasting from 8 to 12 hours.
  • ETL Approved.
  • Swing-open burner door for easy service.
  • Sealed wood gasification chamber – used simultaneously as a loading chamber.
  • Fully assembled, ready for installation.
  • Adapted for closed (pressurized) or open hot water systems.
  • Secondary Combustion Chamber for High Efficiency and Low Emissions.
  • RK2001R4E Boiler electronic regulator mounted directly on top ot the boiler for improved response.
  • Ash Tray.
  • Draft regulator.
  • Fan – linked to the microchip controller, monitoring the quality of the whole burning process – on Orlan Eko 60 and 80 models.
  • Spacious fire box to increase autonomous.
  • Made from Boiler Steel.

  • Smoke tube heat exchanger – (flue gas to water) heats up the installation water.
  • Exhaust reheat space – the main combustion chamber, where temperature reaches about 2000 degreesF serves as an ash pit.
  • Nozzle – made of refractory concrete, mixes wood gases with the secondary air and a flammable mixture is produced that undergoes self-ignition at about 1000 degrees.
  • Safe guard thermostat – each boiler is equipped with an additional safe guard thermostat, which switches off the fan while the water gets up to 180F.
  • Chimney flap – made of high quality steel. Tight flap adhesion to the combustion duct assures the burning chamber tightness .
  • Ash pit – steel bottom of the burning chamber, ceramic ash pit added (working temp. 2200 F) and additionally covered by refractory concrete .
  • Boiler door – produced of high quality steel, insulated with Nobasil thermal insulation and inside covered by refractory concrete layer.
  • Boiler door protected with heat-resisting fiberglass cord.
  • Anti-Burn Levers for Doors.
  • Factory tested.
Heating Capacity 7000 / 11000 Sq. Ft.
Power output 60 kW
Weight 975 kg
Exhaust gas pipe diameter 210 mm
Efficiency 91 %
Water capacity 180 L
Height 1530 mm
Width 860 mm
Depth 1300 mm
Max working pressure 1.8 bar
Max. length of wood 750 mm
Required chimney draught 15 Pa
Outlet and inlet size 2 1/2 inch
Power supply 230V / 50Hz
Brochure
Orlan 40

Orlan 40

Orlan Eko 40 High Efficiency Wood/Coal Burning Gasification Residential Boiler 91% – 137,000 BTU

Orlan 40

Orlan 40

Orlan Eko 40 Wood Steel Boiler provide a convenient, safe and environmentally friendly way to heat your home and domestic hot water with wood. Orlan Eko boilers assure the independence and self-reliance that heating with several different fuel options-wood, 50% coal/wood chips, saw dust, pellets and corn cobs with kernels. Because the boilers use wood gasification combustion, they give unusually high overall heating efficiency up to 91% and will hold heat from single load up to 12 hours. They use substantially less wood or other burning material than conventional boilers and outdoor water stoves with no visible smoke when fully operating. 91% efficiency Orlan Eko wood burning and gasification combustion boilers may be used for heating any kind of building.

They are mostly used in one-family houses, drying houses, workshops, halls, or greenhouses. However, boiler placement is not limited to these applications; the above are just examples of where EKO-Line boilers have worked with success. The EKO-Line wood burning boilers has a large finned firebox and secondary combustion chamber maximize the burn time and minimize wood consumption. Easy adjustments to the automatic temperature control, secondary air regulator, and flue gas damper enhance fire maintenance.

  • Optimized Combustion.
  • Up to 91% efficiency.
  • Output modulating from 40% to 100%.
  • Designed to Ensure uniform thermal load.
  • One load lasting from 8 to 12 hours.
  • ETL Approved.
  • Swing-open burner door for easy service.
  • Sealed wood gasification chamber – used simultaneously as a loading chamber.
  • Fully assembled, ready for installation.
  • Adapted for closed (pressurized) or open hot water systems.
  • Secondary Combustion Chamber for High Efficiency and Low Emissions.
  • RK2001R4E Boiler electronic regulator mounted directly on top ot the boiler for improved response.
  • Ash Tray.
  • Draft regulator.
  • Fan – linked to the microchip controller, monitoring the quality of the whole burning process – on Orlan Eko 60 and 80 models.
  • Spacious fire box to increase autonomous.
  • Made from Boiler Steel.

  • Smoke tube heat exchanger – (flue gas to water) heats up the installation water.
  • Exhaust reheat space – the main combustion chamber, where temperature reaches about 2000 degreesF serves as an ash pit.
  • Nozzle – made of refractory concrete, mixes wood gases with the secondary air and a flammable mixture is produced that undergoes self-ignition at about 1000 degrees.
  • Safe guard thermostat – each boiler is equipped with an additional safe guard thermostat, which switches off the fan while the water gets up to 180F.
  • Chimney flap – made of high quality steel. Tight flap adhesion to the combustion duct assures the burning chamber tightness .
  • Ash pit – steel bottom of the burning chamber, ceramic ash pit added (working temp. 2200 F) and additionally covered by refractory concrete .
  • Boiler door – produced of high quality steel, insulated with Nobasil thermal insulation and inside covered by refractory concrete layer.
  • Boiler door protected with heat-resisting fiberglass cord.
  • Anti-Burn Levers for Doors.
  • Factory tested.
Heating Capacity 4000 / 7000 Sq. Ft.
Power output 40 kW
Weight 595 kg
Exhaust gas pipe diameter 200 mm
Efficiency 91 %
Water capacity 93 L
Height 1570 mm
Width 720 mm
Depth 1020 mm
Max working pressure 1.8 bar
Max. length of wood 500 mm
Outlet and inlet size 2 inch
Power supply 230V / 50Hz
Brochure
Orlan 25

Orlan 25

Orlan Eko 25 High Efficiency Wood/Coal Burning Gasification Residential Boiler 91% – 85,000 BTU

Orlan 25

Orlan 25

Orlan Eko 25 Wood Steel Boiler provide a convenient, safe and environmentally friendly way to heat your home and domestic hot water with wood. Orlan Eko boilers assure the independence and self-reliance that heating with several different fuel options-wood, 50% coal/wood chips, saw dust, pellets and corn cobs with kernels. Because the boilers use wood gasification combustion, they give unusually high overall heating efficiency up to 91% and will hold heat from single load up to 12 hours. They use substantially less wood or other burning material than conventional boilers and outdoor water stoves with no visible smoke when fully operating. 91% efficiency Orlan Eko wood burning and gasification combustion boilers may be used for heating any kind of building.

They are mostly used in one-family houses, drying houses, workshops, halls, or greenhouses. However, boiler placement is not limited to these applications; the above are just examples of where EKO-Line boilers have worked with success. The EKO-Line wood burning boilers has a large finned firebox and secondary combustion chamber maximize the burn time and minimize wood consumption. Easy adjustments to the automatic temperature control, secondary air regulator, and flue gas damper enhance fire maintenance.

  • Optimized Combustion.
  • Up to 91% efficiency.
  • Output modulating from 40% to 100%.
  • Designed to Ensure uniform thermal load.
  • One load lasting from 8 to 12 hours.
  • ETL Approved.
  • Swing-open burner door for easy service.
  • Sealed wood gasification chamber – used simultaneously as a loading chamber.
  • Fully assembled, ready for installation.
  • Adapted for closed (pressurized) or open hot water systems.
  • Secondary Combustion Chamber for High Efficiency and Low Emissions.
  • RK2001R4E Boiler electronic regulator mounted directly on top ot the boiler for improved response.
  • Ash Tray.
  • Draft regulator.
  • Fan – linked to the microchip controller, monitoring the quality of the whole burning process – on Orlan Eko 60 and 80 models.
  • Spacious fire box to increase autonomous.
  • Made from Boiler Steel.

  • Smoke tube heat exchanger – (flue gas to water) heats up the installation water.
  • Exhaust reheat space – the main combustion chamber, where temperature reaches about 2000 degreesF serves as an ash pit.
  • Nozzle – made of refractory concrete, mixes wood gases with the secondary air and a flammable mixture is produced that undergoes self-ignition at about 1000 degrees.
  • Safe guard thermostat – each boiler is equipped with an additional safe guard thermostat, which switches off the fan while the water gets up to 180F.
  • Chimney flap – made of high quality steel. Tight flap adhesion to the combustion duct assures the burning chamber tightness .
  • Ash pit – steel bottom of the burning chamber, ceramic ash pit added (working temp. 2200 F) and additionally covered by refractory concrete .
  • Boiler door – produced of high quality steel, insulated with Nobasil thermal insulation and inside covered by refractory concrete layer.
  • Boiler door protected with heat-resisting fiberglass cord.
  • Anti-Burn Levers for Doors.
  • Factory tested.
Heating Capacity 2000 / 3800 Sq. Ft
Power output 25 kW
Weight 525 kg
Exhaust gas pipe diameter 200 mm
Efficiency 91 %
Water capacity 75 L
Height 1320 mm
Width 720 mm
Depth 976 mm
Max working pressure 1.8 bar
Max. length of wood 500 mm
Required chimney draught 15 Pa
Outlet and inlet size 2 inch
Power supply 230V / 50Hz
Brochure
Orlan 18

Orlan 18

Orlan Eko 18 High Efficiency Wood/Coal Burning Gasification Residential Boiler 91% – 65,000 BTU

Orlan 18

Orlan 18

Orlan Eko 18 Wood Steel Boiler provide a convenient, safe and environmentally friendly way to heat your home and domestic hot water with wood. Orlan Eko boilers assure the independence and self-reliance that heating with several different fuel options-wood, 50% coal/wood chips, saw dust, pellets and corn cobs with kernels. Because the boilers use wood gasification combustion, they give unusually high overall heating efficiency up to 91% and will hold heat from single load up to 12 hours. They use substantially less wood or other burning material than conventional boilers and outdoor water stoves with no visible smoke when fully operating. 91% efficiency Orlan Eko wood burning and gasification combustion boilers may be used for heating any kind of building.

They are mostly used in one-family houses, drying houses, workshops, halls, or greenhouses. However, boiler placement is not limited to these applications; the above are just examples of where EKO-Line boilers have worked with success. The EKO-Line wood burning boilers has a large finned firebox and secondary combustion chamber maximize the burn time and minimize wood consumption. Easy adjustments to the automatic temperature control, secondary air regulator, and flue gas damper enhance fire maintenance.

  • Optimized Combustion.
  • Up to 91% efficiency.
  • Output modulating from 40% to 100%.
  • Designed to Ensure uniform thermal load.
  • One load lasting from 8 to 12 hours.
  • ETL Approved.
  • Swing-open burner door for easy service.
  • Sealed wood gasification chamber – used simultaneously as a loading chamber.
  • Fully assembled, ready for installation.
  • Adapted for closed (pressurized) or open hot water systems.
  • Secondary Combustion Chamber for High Efficiency and Low Emissions.
  • RK2001R4E Boiler electronic regulator mounted directly on top ot the boiler for improved response.
  • Ash Tray.
  • Draft regulator.
  • Fan – linked to the microchip controller, monitoring the quality of the whole burning process – on Orlan Eko 60 and 80 models.
  • Spacious fire box to increase autonomous.
  • Made from Boiler Steel.

  • Smoke tube heat exchanger – (flue gas to water) heats up the installation water.
  • Exhaust reheat space – the main combustion chamber, where temperature reaches about 2000 degreesF serves as an ash pit.
  • Nozzle – made of refractory concrete, mixes wood gases with the secondary air and a flammable mixture is produced that undergoes self-ignition at about 1000 degrees.
  • Safe guard thermostat – each boiler is equipped with an additional safe guard thermostat, which switches off the fan while the water gets up to 180F.
  • Chimney flap – made of high quality steel. Tight flap adhesion to the combustion duct assures the burning chamber tightness .
  • Ash pit – steel bottom of the burning chamber, ceramic ash pit added (working temp. 2200 F) and additionally covered by refractory concrete .
  • Boiler door – produced of high quality steel, insulated with Nobasil thermal insulation and inside covered by refractory concrete layer.
  • Boiler door protected with heat-resisting fiberglass cord.
  • Anti-Burn Levers for Doors.
  • Factory tested.
Heating Capacity 1000 / 2000 Sq. Ft.
Power output 18 kW
Weight 425 kg
Exhaust gas pipe diameter 180 mm
Efficiency 91 %
Water capacity 55 L
Height 1220 mm
Width 660 mm
Depth 960 mm
Max working pressure 1.8 bar
Max. length of wood 500 mm
Required chimney draught 15 Pa
Outlet and inlet size 2 inch
Power supply 230V / 50Hz
Brochure